Glass glue use method Glass glue removal method

Although glass glue is a very small thing, its usage rate is still very high. For example, glass glue is used for fixed glass, fixed washbasins and toilets. However, in different situations, different glass glues are used. If the wrong glass glue is used, it will lead to mildew, even leaks in the windows, leakage in the countertops, and other troubles. Therefore, the following Xiaobian introduced the use of glass glue and glass glue removal method.

Glass adhesive use method

1, first clean the seam surface of the water, grease and other debris, scrub with a dry rag, let the surface dry and clean.

2. The surface of the interface can be covered with plastic tape, so as to ensure the integrity of the work shoe.

3, can be cut according to the size of the filling seam at an angle of 45 °, and then install the needle nozzle.

4. Install the caulking gun to ensure that the rubber and the substrate surface are in close contact. If the seam width is more than 18mm, it needs repeated gluing. After the gluing, the surface is trimmed with a tool, the excess rubber is removed, and the tape is torn off. If there is a stain, it can be removed with a damp cloth.

5, sealant generally at room temperature about 10 minutes the surface can be vulcanized, and other fully vulcanized longer, this should be based on the thickness of the coating and the environment temperature and humidity vary.

Glass adhesive removal method

1, glass glue is not cured better cleaning, whether it is clothes or the body, as long as a light scrub with a rag, it is easy to remove, this is not the most solid cleaning is the cleaning.

2. If you accidentally stain the glass glue while installing the glass, you can use a blade to gently scrape it off, but be careful not to use too much force or you will scratch the glass.

3, different glass glue characteristics are also different, glass glue can be divided into acidic glass glue and neutral glass glue, but contains different substances, so can not be removed by the same method, otherwise it will cause unexpected results.

4, can use banana water clear, because banana water has "butyl acetate" component, can effectively dissolve in various organic solvents, the effect is very good.

5, can use nail polish water, the effect is good, nail polish water requirements are not high, only need to be able to wash off nail polish can be, because the nature of nail polish and glass glue itself is similar, but also belong to the high viscosity of the solid is not easy to clean type.

Editor's summary: About the use of glass glue and glass glue removal method introduced here, and hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Glass glue glass glue use method