How to Laminate Wood Flooring and Laminate Flooring

Laminate flooring is one of the most common building materials used in home renovations. For example, engineered wood flooring and reinforced flooring are often used in bedroom floor renovations. Then, what is the difference between parquet and laminate flooring ? Next, Xiao Bian uses examples from life to give you an example of the difference between engineered flooring and laminate flooring .Floor Compound Glue

First, the difference between solid wood composite flooring and laminate flooring laminate floor glue

1, solid wood composite floor

It is made up of three layers of solid wood, laminated and laminated. The outermost layer is high-quality hardwood such as ash, birch, cherry, etc. The middle layer is softwood strips; the bottom layer is crisscrossed and veneer. Taking a snack as an example, the structure of wafers is very similar, with a layer of solid wood panels, multi-layered substrates, and hot pressing with a mixture of glue. Good or bad glue, directly affect the environmental protection of solid wood flooring, which is the content of formaldehyde.

2, reinforced laminate flooring

It is composed of four layers of materials, namely wear layer, decorative layer, high density substrate layer and balance layer. Normally qualified laminate flooring requires impregnation of thermosetting amino resin and covers the entire surface of the high density board. In addition to the decorative layer and wear layer on the front, a damp proof layer must be added on the back side; during the entire production process of the laminate flooring, Need to use a lot of glue. Therefore, the formaldehyde content of laminate flooring is a measure of quality.

Second, how to laminate flooring

1, clean up the scene. When laying laminate flooring, the ground must be cleaned, especially the corners, so as not to affect the subsequent construction.

2, ground leveling. If your ground has a certain amount of cement bumps, it is recommended to level it out. The horizontal error cannot exceed 2 mm. If the error is too large, it will affect the feeling of foot and comfort.

3, moisture-proof layout. The damp-proof layer is laid to prevent the wood flooring from being damaged by moisture in the future use.

4, gap reserved. The thermal expansion and contraction is a common phenomenon in the use of wooden floors for many years. As long as there is a gap reserved, the wooden floor can be avoided.

5, reinforcement. After the completion of the overall error detection, it is also necessary to use professional tools to reinforce and connect the edges.

The article is summarized: The above is all the contents of the difference between parquet and laminate flooring prepared by Xiaobian. Many netizens will ask which kind of laminate flooring is better? Xiaobian teaches you a trick, which type of regular wood flooring uses less glue in the production process, so which one to choose?