Hydrophilic hot melt adhesive and low temperature hot melt adhesive

There are many kinds of traditional hot melt adhesives/hot melt adhesive, their uses are different, and the composition is different. So everyone has a certain degree of cognitive error on the hydrophilic properties of hot melt adhesives. Today, 

Xiaobian is a simple science for everyone. A hydrophilic hot melt glue and a low temperature hot melt adhesive. 

Hot melt pressure sensitive adhesives Traditional hot melt adhesive types / hot melt adhesives are available in a wide variety of applications, with different compositions, so that everyone has a certain hydrophilicity on hot melt adhesives. The degree of cognitive error, today's small series for everyone's simple science of hydrophilic hot melt adhesive and low temperature hot melt adhesive. Hydrophilic hot melt adhesives: Traditional hot melt adhesives are generally hydrophobic. Hydrophilic hot melt adhesives are made hydrophilic by special formulations. Each hydrophilic hot melt adhesive can give higher products. The added value enables product manufacturers to effectively differentiate their products in the current highly competitive market, and ultimately win consumers. Low-temperature hot-melt adhesive: Breaking through the limits of the use of conventional hot melt adhesives. Its normal operating temperature is only 110 ° C ~ 130 ° C, low temperature hot melt adhesive is 30 ° C lower than the traditional hot melt adhesive. The direct benefit of low temperature hot melt adhesives is the savings in electricity and machine maintenance. A large number of practical applications show that the same hot melt machine, using low temperature hot melt adhesive can save customers about 15% of the electricity bill. However, since the low-temperature hot-melt adhesive has almost no aging phenomenon such as skinning and carbon deposition at its normal operating temperature of 110 ° C to 130 ° C, the maintenance cost of the machine is greatly reduced.